Foshan Chuangchi CNC Equipment Co., Ltd.

Foshan Chuangchi Electromechanical Equipment Co. LTD
tel

 National Service Hotline:
0757-85924925

搜索
Search
SERVICE SUPPORT

Introduction to the classification of Mitsubishi CNC systems

  • Categories:Technical Type
  • Author:
  • Origin:
  • Time of issue:2020-08-14
  • Views:0

(Summary description)

Introduction to the classification of Mitsubishi CNC systems

(Summary description)

  • Categories:Technical Type
  • Author:
  • Origin:
  • Time of issue:2020-08-14
  • Views:0
Information

The commonly used Mitsubishi CNC systems in the industry are: M700V series; M70V series; M70 series; M60S series; E68 series; E60 series; C6 series; C64 series; C70 series. Mitsubishi CNC system M700V series 1. The control unit is equipped with the latest RISC 64-bit CPU and high-speed graphics chip, through an integrated design to achieve complete nano-level control, super-class processing capabilities and high-quality screen display. 2. The MDS-D/DH-V1/V2/V3/SP, MDS-D-SVJ3/SPJ3 series drivers matched by the system can be connected via a high-speed optical fiber network to achieve the highest efficient communication response. Using ultra-high-speed PLC engine to shorten the cycle time. 3. Equipped with front-mounted IC card interface. 4. Equipped with USB communication interface. 5. Equipped with 10/100M Ethernet interface. 6. Really personalized interface design (implemented through NC Designer or c language), supports multi-layer menu display. 7. Intelligent wizard function, supporting html, jpg and other format files created by machine tool manufacturers. 8. Estimation of product processing time. 9. Multi-language support (8 languages ​​support, expandable to 15 languages): 10. Complete nano-control system, high-precision and high-grade processing 11. Support 5-axis linkage, can process workpieces with complex surface shapes. Various keyboard specifications ( Horizontal, vertical) support 12. Support touch screen, improve operation convenience and user experience. Mitsubishi CNC system M70V series 1, according to customer's different application requirements and function breakdown, M70V Type A: 11 axis and Type B: 9 axis are optional 2, M70VA milling machine standard supports dual systems 3. The minimum command unit of the M70V series is 0.1 micron, the internal control unit is increased to 1 nanometer 4. The maximum program capacity is increased to 2560m (optional), and the custom screen storage capacity is increased (requires an external board ) 5. The M70V series has the same PLC processing performance as the M700V series. 6. The screen color is increased from 8bit to 16bit, and the effect is more vivid. 7. The standard provides online simple programming support functions (NaviMill, NaviLathe) to simplify the writing of processing programs. 8. NC Designer custom screen development and correspondence, personalized interface operation, improve the visibility of machine tool manufacturers 9. The standard is equipped with an Ethernet interface (10BASE-T/ 100BASE-T), improve the data transmission rate and reliability 10, the PC platform servo automatic adjustment software MS Configurator, simplify the servo optimization method 11, support high-speed synchronous tapping OMR-DD function, shorten the tapping cycle time, minimize the simultaneous tapping Error 12. Fully adopt high-speed optical fiber communication to improve data transmission speed and reliability. Mitsubishi CNC system M70 series 1. According to customer's different application requirements and functional breakdown, M70 Type A: 11 axis and Type B: 9 axis 2 are optional .The internal control unit (interpolation unit) is 10 nanometers, and the minimum command unit is 0.1 micron to achieve high-precision processing. 3. Support wizard interface (alarm wizard, parameter wizard, operation wizard, G code wizard, etc.) to improve user experience 4. Simplify Processing program writing 5. NC Designer custom screen development correspondence, personalized interface operation, improve the visibility of machine tool manufacturers 6. Standard Ethernet interface (10BASE-T/100BASE-T), improve data transmission rate and reliability 7. PC platform Servo automatic adjustment software MS Configurator simplifies servo optimization methods 8. Supports high-speed synchronous tapping OMR-DD function, shortens the tapping cycle time, and minimizes synchronous tapping errors. 9. Fully adopts high-speed optical fiber communication to improve data transmission speed and reliability Mitsubishi CNC system M60S series 1. All M60S series controllers are equipped with RISC64-bit CPU as standard, which has the highest level of hardware performance in the world. (Compared with M64, the overall performance is improved by 1.5 times) 2. High-speed and high-precision functions are compatible, which is especially suitable for mold processing. (M64SM-G05P3: 16.8m/min or more, G05.1Q1: planned) The standard built-in corresponds to 12 kinds of multi-language operation interfaces (including traditional/simplified Chinese) commonly used in the world. 3. It can correspond to the built-in Ethernet and IC Card interface (M64SM-high-speed program server: planned) 4. Coordinate display value conversion can be switched freely (program value display or manual insertion amount display switch) 5. Standard built-in waveform display function, workpiece position coordinate and center point measurement function 6. Buffer correction function expansion: it can correspond to IC card/computer link B/DNC/memory/MDI and other modes. 7. The editing mode in the editing screen can be automatically switched to full page editing or full sentence editing. 8. Graphic display function improvement: it can contain prop path data to fully display the workpiece coordinates and the actual position of prop compensation. 9. Simple dialogue program software (Magicpro-NAVIMILL dialogue program developed by APLC) 10. PLC development software corresponding to Windows95/98/2000/NT4.0/Me 11. Special G code and fixed cycle program, such as G12 /13, G34/35/36, G37.1, etc. Mitsubishi CNC system E68 series 1. A high-performance CNC system with a 64-bit CPU, which uses an integrated design of controller and display to achieve ultra-miniaturization. 2. The servo system adopts a thin servo motor and a high-resolution encoder (131,072 pulses/rev), and the incremental/absolute correspondence. 3. Standard 4 kinds of text operation interface: simplified/traditional Chinese, Japanese/English. 4. The control software of the lathe or milling machine is selected by the parameters, simplifying maintenance and inventory. 5. All software functions are standard configuration, no options, the function is equivalent to M50 series. 6. There is a standard analog output interface for controlling the spindle of the frequency converter. 7. Mitsubishi Electric MELSEC development software GX-Developer can be used to simplify the development of PLC ladder diagrams. 8. The new MDS-R series of servo drives with integrated 2-axis can be used to reduce installation space. 9. Develop automatic servo adjustment software to save debugging time and manpower for technical support. The Mitsubishi CNC system C6 series 1, meets the requirements for processing parts of the production line (automobile engines, etc.), improves reliability, and shortens downtime. 2. Corresponding to a variety of Mitsubishi FA networks: MELSECNET/10, Ethernet and CC-LINK, achieving high-speed and large-capacity data communication at a speed of 10M/100Mbps, and further improving the processing efficiency of the production line. 3. NC built-in PLC function enhancement: GX-Developer correspondence; abundant instruction types; multiple PLC programs running at the same time; PLC program modification during operation; multi-system PLC interface signal configuration, etc. 4. Expansion of PLC instructions for special planes: ATC, ROT, TSRH, DDBA, DDBS instructions have been added, simplifying PLC program design. ☆ Enhanced CNC function, multi-axis, multi-system correspondence. Mitsubishi CNC system C70 series 1. Meet the production line (automobile engine, etc.) parts processing requirements, improve reliability, shorten the failure time 2. A substrate can be connected to a maximum of 2 NC controllers at the same time 3. Enhanced CNC function (single NC The controller supports the maximum number of systems 7 and the maximum support 6 spindles) 4. Color touch screen display is used as standard, and GT Designer can be used to customize the operation interface 5. PC platform servo automatic adjustment software MS Configurator, simplifying the servo optimization method 6. Fully adopts high-speed optical fiber Communication, improve data transmission rate and reliability

Foshan Chuangchi Electromechanical Equipment Co., Ltd. is a large-scale comprehensive company specializing in the sales of FANUC and MITSUBISHI CNC machine tool control system accessories, and also providing customers with CNC equipment maintenance!

The company has a variety of advanced testing platforms, excellent technology, complete accessories and strong strength. In the long-term CNC work, the company takes the satisfaction of new and old customers as the standard, the principle of high-efficiency and high-quality products, and the advantage of ultra-high cost performance. It has won unanimous praise from customers at home and abroad.

After long-term training and practice, the company has established a high-quality professional maintenance team, with a large number of electronic boards, servo motors, servo amplifiers, encoders, and other corresponding CNC maintenance parts as the basis. Any product sent to our company for maintenance, Same day delivery can be achieved!

The company has a complete range of accessories, and most of the products are available from stock. Any purchase of our products can be delivered within 24 hours within the province and within 48 hours outside the province.

Scan the QR code to read on your phone

相关内容

There is currently no information to display
Please add data record on website background.

Add: No. 13, south of Jianshe Avenue, Michong, Huangqi, Nanhai District, Foshan
TEL: 0757-85924925 85963120   FAX:0757-85962123
Taobao:http://fschuangchi.taobao.com
E-mail:cnc@chuangchi.com 

Copyright© 2021 www.chuangchi.com   All Rights Reserved
粤ICP备12076879  Powered by www.300.cn

qr

Wechat

qr

Taobao